Glove Box Laboratory Equipment

DECO-VGB-304-2-C is a stainless steel anaerobic glove box with full view front panel, air-lock chambers, gauges and vacuum flanges, which allow glove box operate in inert atmosphere to remove moisture and oxygen.
Chat Now

Product Details

Glove Box Laboratory Equipment


Lab testing vacuum chamber  Dry / Hypoxic / Anaerobic Glove Box Overviews 

Some materials are very sensitive to water and oxygen when doing chemical experiment. So it is hard to finish the research. Although vacuum vessel can satisfy anaerobic and vacuum degree, it is not convenient for operating the procedure. Vacuum glove box solve the environment and operation problem.


DECO-VGB-304-2-C is a stainless steel anaerobic glove box with full view front panel, air-lock chambers, gauges and vacuum flanges, which allow glove box operate in inert atmosphere to remove moisture and oxygen. It is an ideal tool for material and chemical researchers to process air sensitive materials and solutions. It also provides universities and commercial firms a cost-effective solution with full inert atmosphere performance and a user friendly control system.


Working Principle of Lab Vacuum Glove Box 

It is mainly composed of main box, transit room and base,there are 2 or 3 glove interfaces. In front of the main box, user can clearly view the box inner situation. There is one vacuum ball valve above the main box. It can be used according to user needs. Light bulb can be also installed. Transit room means the transition between the main box and outdoor, composed by two sealed doors, two vacuum ball valves and one room. Two doors isolate main box from connecting with the outdoor, making material putting in and taking out for lab easily.


Specifications



     Power

110V/220VAC, 50/60Hz

Glove Box Chamber

•  Glove Box : DECO-VGB-304-2-C
•  Single Sided and Single Length (2 Ports)
•  Case Material : Made of 6mm thickness 304 stainless steel sheet which provide heavy duty structure for vacuum
•  Dimensions : 760mm(L) x 610mm(W) x 700mm(H)
•  Full view front panel, 760mm(L) x 700mm(W) x 20mm(T)
•  With 2 glove ports, Dia175mm
•  Max. Positive Pressure : 0 MPa
•  Max. Vacuum Level : -0.1 MPa

Antechamber

•  Dimensions : 280mm(OD) x 300mm(L) x 6mm(T)
•  304 stainless steel, mounted on right end panel
•  Stainless Steel sliding tray included
•  Manual antechamber ball valves for evacuation and refill
•  Max. Vacuum Level : -0.1 MPa

Weight (Net /Gross)

•  209KG /230KG

Warranty

•  One year limited warranty with lifetime support


* Do not operate under vacuum status. The vacuum process is used for purging the glove box chamber before an operation. 


Details Show
 


图片10.jpg


图片11.jpg



Attention
The DECO-VGB-304-2-C is a simple type vacuum glovebox which only provide a box to isolated air.  If you ask for H2O&O2< 1ppm, then it cannot meet your demand, you should order a glovebox with gas purification system.
 You cannot operate the glovebox under vacuum, because when it is vacuum inside, the pressure in box is lower than in air, so you cannot open the glove ports. You should inlet Inert gas into glovebox until the pressure is the same with air, you can operate.


Packing

Selling Units:

Single item

Single package size:

132X84X89 cm

Single gross weight:

230.0 KG

Package Type:

Vacuum glove box package: (1) plastic wrapping (2) styrofoam (3) standard export plywood case


Inquiry